Highly rigid steel shank and a lightweight head configuration designed by computer simulation analysis reduces chatter and improves the vibration damping properties.

Deflection Resistance

The unique cross sectional shape engineered into the dimple effectively balances the cutting forces (principal and back force), and reduces deflection by up to 17 %.

Boring Bar Deflection
Dimple Bar 28.3μm
Conventional Bar 34μm

Vibration Resistance

Dimple Bar

Weight of the Head Damping Time
49.7g 15.8ms

By reducing the weight of the head, the damping properties are increased.

Conventional Product

Weight of the Head Damping Time
70.1g 20ms

* The simulation data stated above was conducted with a FSCLP1816R-09S holder, under the following conditions; l/d=5, depth of cut=0.5mm, and feed=0.05mm/rev.

Direction for the use of CCG/MT • CPG/MT • CPMX • TPG/MX type inserts

By changing the clamp screw, it is possible to use the inserts listed in the table below.

Direction for the use of CCG/MT • CPG/MT • CPMX • TPG/MX type inserts