MMT series

Feature

M-class inserts with 3-D chip breakers

Features

• Excellent chip control
• Prevents burrs and vibration
• With moulded identification markings for easy thread recognition

MIRACLE coated VP15TF has a good balance of wear and fracture resistance.
MIRACLE coated VP20RT exhibits excellent performance for stainless steel machining. These grades are suitable for a variety of workpiece materials.

Cutting Performance

• Chip control comparison
ISO metric external thread pitch 1.5mm Final pass (6th pass)

G-class ground insert

Features

• A Wide Variety of Products
• Mitsubishi Miracle Threading (MMT) series.193 inserts and 26 holders
• The MMT series allows the threading of a wide range of threads, from standard metric to threads for pipe couplings, gas and aerospace.

• A higher level of precision than conventional inserts.
• The following tolerances can be achieved with the MMT series.

• Long Tool Life with "Sharp" Cutting Edge
• A "sharp" cutting edge lengthens tool life.
• A "sharp" cutting edge can be achieved with a small and uniform honing along the entire cutting edge.

Insert Selection

Choosing M-class inserts with 3-D chip breakers or G-class inserts

• For ideal chip control and a high cost performance ratio, M-class inserts with 3-D chip breakers are recommended.
• G-class inserts are recommended where higher precision is required.

Features of the new holders

Suitable for threading with a large lead angle.

• By changing only the shim, MMT holders can be used for turning of threads with various lead angles as well as the turning of left hand threads.
• Insert interference with the thread can be prevented to achieve a good surface finish.

Internal threading holder with through coolant

• Efficient coolant supply to the cutting point lengthens the life of an insert.
• Smooth chip discharge, the key to efficient internal threading can be achieved.

Application Example